A series of single station machines is
available from ramé-hart
to fill the need for small to medium-size manufacturers of embryonic
egg-cultured vaccines.
The semi-automatic egg machines incorporate the inoculating and harvesting components normally used in our fully-automated machines. Only the tray-handling and positioning mechanisms have been eliminated. In this way, although the trays must be loaded manually and the spent eggs manually unloaded, much of the cost of the automatic inoculating/harvesting system has been eliminated while still using the proven inoculating and harvesting methods.
Another advantage of the semi-automatic machines is that they can be easily modified to work with different size egg trays and other special custom requirements.
The semi-automatic machines are also available with the needle sanitizing option on the inoculator and fluid inspection and rejection on the harvester.
The semi-automatic egg machines incorporate the inoculating and harvesting components normally used in our fully-automated machines. Only the tray-handling and positioning mechanisms have been eliminated. In this way, although the trays must be loaded manually and the spent eggs manually unloaded, much of the cost of the automatic inoculating/harvesting system has been eliminated while still using the proven inoculating and harvesting methods.
Another advantage of the semi-automatic machines is that they can be easily modified to work with different size egg trays and other special custom requirements.
The semi-automatic machines are also available with the needle sanitizing option on the inoculator and fluid inspection and rejection on the harvester.
 |
| Harvester Nozzle |
 |
| Accumulator |
Disassembly
and Cleaning
1.Removal
of Harvesting Head
a. Remove Harvest tubes from Harvesr
nozzles
b. Remove the thumbscrewa for each of the
nozzle bars and remove each nozzles bar.
c. Remove the harvest nozzles from the
nozzle bar by pulling out the nozzle bayonet clips. The nozzle sleeve will fall
away from the nozzle.
d. Open the pinch bar and pull out the
harvest tubes.
2.Removal
of Accumulator
a. Empty the accumulator. Open the valve
at the bottom.
b. Remove the harvest tubes from the
barbs at the top of the accumulator.
c. Remove the vacuum tube from the top of
the accumulator.
d. Remove the top of Accumulator.
e. Unscrew the tie rods that hold the
upper and lower plates to the glass cylinder.
3.
Clean all machine surfaces
The
nozzles, the nozzle bars and the accumulator may
be autoclaved
Tag # Vaccine, Machine, Egg, Harvest, Chicken, Veterinary, Animal, Cleaning, Nozzle, Maintenance
Tidak ada komentar:
Posting Komentar